Kenwood KRF-X9992D Connection And Setup Manual

Also see for KRF-X9992D: User guide Service manual

Contents

42SpecificationsChapter Three : Warnings and Specifications Audio-Video Receiver KRF-X9992DVideo SectionVideo Inputs / OutputsVideo (composite) .............................................. 1 Vp-p / 75 ΩS Video ( luminance signal) ............................... 1 Vp-p / 75 Ω(chrominance signal) .................... 0.286 Vp-p / 75 ΩFM Tuner SectionTuning Frequency Range ............................ 87.5 MHz ~ 108 MHzUsable Sensitivity (DIN)Mono ...... 1.2 μV (75 Ω) / 13.2 dBf (40 kHz dev., S/N 26 dB)Stereo ....... 45 μV (75 Ω) / 44.2 dBf (46 kHz dev., S/N 46 dB)Total Harmonic Distortion (DIN at 1 kHz)Mono .................................................... 0.2 % (65.2 dBf input)Stereo .................................................... 0.8 % (65.2 dBf input)Signal to Noise Ratio (DIN weighted, 1kHz)Mono .............................. 65 dB (40 kHz dev., 65.2 dBf input)Stereo .............................. 60 dB (40 kHz dev., 65.2 dBf input)Stereo Separation (DIN at 1 kHz) ...................................... 36 dBSelectivity (DIN, +300 kHz) .............................................. 64 dBFrequency Response ................. 30 Hz ~ 15 kHz, +0.5 dB, -3.0 dBMW (AM) Tuner SectionTuning Frequency Range ............................ 531 kHz ~ 1,602 kHzUsable Sensitivity (30 % mod., S/N 20 dB)............................................................................ 16 μV / (600 μV/m)Signal to Noise Ratio (30 % mod. 1 mV input) ................. 50 dBGeneralPower consumption ........................................................... 600 WAC outletSwitched .................................................. 2 (total 100 W max.)Dimensions ................................................ W : 440 mm (17-5/16”)H : 162 mm (6-3/8”)D : 391 mm (15-3/8”)Weight (Net) ...................................................... 15.2 kg (33.5 lb)Chapter Three: SpecificationsRead this page carefully to ensure safe operation.KRF-X9992D SpecificationsAudio SectionRated Output Power during stereo operation63 Hz ~ 12.5 kHz, 0.7 % T.H.D. , 6 Ω (DIN/IEC)........................................................................... 130W + 130 WEffective Output Power during surround operationFront1 kHz, 0.06 % T.H.D. at 6 Ω, one channel driven.......................................................................... 130 W + 130 WCenter1 kHz, 0.06 % T.H.D. at 6 Ω, one channel driven ........ 130 WSurround1 kHz, 0.06 % T.H.D. at 6 Ω, one channel driven.......................................................................... 130 W + 130 WTotal Harmonic Distortion ............... 0.004 % (1 kHz, 65 W, 6 Ω)Frequency Response (IHF’66)CD1 ........................................... 5 Hz ~ 80 kHz, +0.5 dB, -3 dBSignal to Noise Ratio (IHF ‘66)Phono (MM) ................................................................... 76 dBCD1 ................................................................................... 96 dBInput Sensitivity / ImpedancePhono (MM) .................................................... 2.5 mV / 47 kΩCD1 .................................................................. 200 mV / 47 kΩ6ch input ......................................................... 200 mV / 47 kΩOutput Level / ImpedanceTape Rec ........................................................... 200 mV / 220 ΩPre Out (Front, Center, Surround, Subwoofer) ..... 1 V / 500 ΩTone ControlBass ............................................................. + 7 dB (at 100 Hz)Treble .......................................................... + 7 dB (at 10 kHz)Loudness ControlVolume at -40 dB level ......... +7 dB (100 Hz), +4 dB (10 kHz)Digital Audio SectionSampling Frequency ............................ 32 kHz, 44.1 kHz, 48 kHzInput Level / Impedance / WavelengthOptical ......................... -15 dBm ~ -21 dBm, 660 nm +30 nmCoaxial .............................................................. 0.5 Vp-p / 75 ΩOutput Level / Impedance / WavelengthOptical ......................... -15 dBm ~ -21 dBm, 660 nm +30 nmNOTE: Do not use contact cleaning agents becausethey could cause a malfunction. Be especially carefulnot to use contact cleaning agents containing oil,since they may deform the plastic components.Kenwood follows a policy of continuous advance-ments in development. For this reason, specifica-tions may be changed without notice.Full performance may not be exhibited in extremelycold locations (below 0 deg. C).