Kenwood KRF-X9992D Connection And Setup Manual

Also see for KRF-X9992D: User guide Service manual

Contents

iiiBefore Applying PowerRead this section carefully to ensure safe operation.THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUSVOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNI-TUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DONOT REMOVE COVER (OR BACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICEPERSONNEL.THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERTTHE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVIC-ING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.KRF-X9992D is designed for operation as follows.U.K. and Europe ........................... AC 230 V onlyWARNING :TO PREVENT FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS AP-PLIANCE TO RAIN OR MOISTURE.Safety PrecautionsRead this section carefully to ensure safe operation.Factory fitted moulded mains plug1. The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse.2. The fuse cover must be refitted when replacing the fuse in the moulded plug.3. Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the powerpoints in your home or the cable is too short to reach a power point, then obtain an appropriatesafety approved extension lead or adapter, or consult your dealer.If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, toavoid a possible shock hazard by inadvertent connection to the mains supply.IMPORTANT : The wires in the mains lead are coloured in accordance with the following code:Blue : NeutralBrown : LiveDo not connect those leads to the earth terminal of a three-pin plug.