Kenwood KRF-X9992D Connection And Setup Manual

Also see for KRF-X9992D: User guide Service manual

Contents

13Chapter One : Connecting Your Devices Audio-Video Receiver KRF-X9992DConnectionsConnecting Your VCR(s), continuedDo not plug in the receiver to AC power until youhave connected all your devices.This section focuses on the connections from yourVCR to the KRF-X9992D. Please refer to your VCR’sinstructions for more detail about its connectionjacks and capabilities.The instructions in this section show one of severalpossible variations on connecting your VCR. Forfurther assistance on optional configurations,contact the store where you purchased your receiver.To Connect a Primary VCR:1. Review the information under “Before YouBegin” on page␣ 1. It contains important notesabout the types of video connections you canmake.2. Connect the audio and video cables from theVCR’s Audio and Video jacks to the receiver’sVIDEO 1 REC OUT and PLAY IN jacks as shownto the left.3. Be sure to connect the VCR Video IN cable to thejack labeled REC OUT and the VIDEO OUTcable to the jack labeled PLAY IN.4. Go to “Noting Your Devices” on page␣ 3 and notewhich jack you used to connect your VCR. Inaddition, note the brand name and modelnumber of the VCR.To Connect a Secondary VCR:1. Review the information under “Before YouBegin” on page␣ 1. It contains important notesabout the types of video connections you canmake.2. Connect the audio and video cables from theVCR’s Audio and Video jacks to the receiver’sVIDEO 2 REC OUT and PLAY IN jacks.3. Be sure to connect the VCR Video IN cable to thejack labeled REC OUT and the VIDEO OUTcable to the jack labeled PLAY IN.4. Go to “Noting Your Devices” on page␣ 3 and notewhich jack you used to connect your VCR. Inaddition, note the brand name and modelnumber of the VCR.