5 Press the [ ] or [ ] button to set up the selected function item.● Press and hold the [ ] button to return to the category list.6 Press [J]/[K] to select your desired setting.● For settings with more than one level, repeat steps 5 and 6.7 Press the [ ] or [ ] button to set the selected setting and exit Menu mode.● Press and hold the [ ] button at any time to return to the previous display.● Press the [ ] button at any time to exit Menu mode.FUNCTION MODEYour transceiver operations vary according to the functions that your dealer hasprogrammed onto the transceiver buttons. Refer to “FUNCTION LIST” for theavailable programmable functions.FUNCTION LISTPF Button: Functions that can be programmed to the transceiver buttonsMenu: Functions that can be accessed using the transceiver MenuAnalog Conv.: Channels set up for Analog Conventional OperationNXDN Conv.: Channels set up for NXDN Conventional OperationDMR Conv.: Channels set up for DMR Conventional OperationLTR Trunking: Channels set up for LTR Trunking OperationNXDN Trunking: Channels set up for NXDN Trunking Operationp: AvailableN/A: Not Availableo Conventional OperationFunction Menu DisplayPFButtonMenuAnalogConv.NXDNConv.DMRConv.None - p N/A p p p2-tone 2-tone p p p p N/AActivity Detection *1 Activity Det p p p p pActivity Reset *1 - p N/A p p pANR Preset ANR Preset N/A p p p pAudio Profile Audio Profile N/A p p p pAuto Telephone Auto Telephone p p N/A N/A N/AAutodial Auto Dial p p p p N/AAutodial Programming Auto Dial Prog p p p p pAUX *1 AUX p p p p pAUX A *2 AUX A p p p p pAUX B *2 AUX B p p p p pAUX C *2 AUX C p p p p p10