Kenwood NX-3000 Series User Manual

Also see for NX-3000 series: User guide User guide User guide User manual User guide

TRANSMITTING1 Select the desired zone and channel using the buttons programmed as [ZoneUp]/ [Zone Down] and [Channel Up]/ [Channel Down].2 Press the PTT switch and speak into the microphone. Release the PTT switch toreceive.● The LED indicator lights red while transmitting and green while receiving a signal. Thisindicator can also be disabled by your dealer.● For best sound quality at the receiving station, hold the microphone approximately 1.5inches (3 cm to 4 cm) from your mouth.o Making Group Calls (NXDN Conventional/ DMR Conventional)You can select a group ID from the list to make a call to those parties on aConventional channel.1 Press the button programmed as [Group], [Group + Short Message] or [Group+ Status] to enter Group Call Mode.Alternatively, press the button programmed as [Menu] to enter Group Call Mode usingthe Menu Mode.● The group ID list appears on the display.2 Press the [J] and [K] buttons to select a Group ID/ name from the list that hasbeen pre-entered into your transceiver.3 Press and hold the PTT switch to make the call.● The “ ” icon blinks. “Group” and the Group name of the target transceiver aredisplayed.● Speak into the transceiver as you would during a normal call.5