Kenwood NX-3000 Series User Manual

Also see for NX-3000 series: User guide User guide User guide User manual User guide

BUILT-IN MEMORYVoice recordings recorded using Auto Recording and the GPS data received arestored in the built-in memory of this transceiver.Auto RecordingAuto Recording records and retains your last conversation, allowing you to catchwhat you may have missed hearing during the conversation.If activated, the auto recording function will continuously record all transmitted andreceived signals to the built-in memory according to the maximum recording lengthset.● The indicator blinks while recording is in progress.When recording is made to the built-in memory, the backup timing of the voicerecording varies according to the First-in First-out Deletion setting. If First-in First-outDeletion is enabled, the recording is backed up when the transceiver is turned offusing the Power switch. If disabled, the recording is backed up each time a recordingis made. For details on the First-in First-out Deletion function, consult your dealer.Note:● Recording stops when the maximum recording length is reached.● New recordings cannot be made when the built-in memory is full. However, if the First-inFirst-out Deletion function is enabled, the oldest audio data will be deleted to make spacefor new recordings.● If the First-in First-out Deletion function is enabled and recording is made to the built-inmemory, the transceiver turns off without backing up the recording when it is turned off inthe following situations:– When the battery runs out– When the battery pack is removed from the Portable transceiver– When the power cable is unplugged on the Mobile transceiver● You can play back the voice recording in Playback mode, or delete the recording ifnecessary.● If Auto Recording is used concurrently with the GPS Data Storage function, the beginningof the audio recorded by Auto Recording may be clipped off.GPS Data StorageThe GPS data is stored temporarily in the transceiver RAM at every GPS StorageInterval from the GPS unit. The data will be written to the built-in memory when morethan three pieces of data are collected. The stored GPS data in the built-in memorycan be sent from the transceiver via NXDN Air Protocol or can be read on a PC.65