Kenwood NX-3000 Series User Manual

Also see for NX-3000 series: User guide User guide User guide User manual User guide

EMERGENCY CALLSIf your transceiver has been programmed with the Emergency function, you can makeemergency calls.Note:Portable● Only the Auxiliary (orange) button and the PF 1 (orange) button of the optional speaker/microphone can be programmed with the Emergency function. (NX-3200/ NX-3300 only)Mobile● Only the Auxiliary ( ) button can be programmed with the Emergency function.1 Press and hold the button programmed as [Emergency].● Depending on the delay time programmed into your transceiver, the length of time youmust hold the Emergency button will vary.● When the transceiver enters Emergency mode, the transceiver will change to theEmergency channel and begin transmitting based on how the transceiver is set up byyour dealer. Transmit periods are also set by your dealer.2 To exit Emergency mode, press and hold the [Emergency] button again.● If the Emergency mode completes a preset number of cycles, Emergency mode willautomatically end and the transceiver will return to the zone and channel that was inuse before Emergency mode was entered.Note:● Your dealer can set the transceiver to emit a tone when Emergency mode starts and stops.● Your dealer can set the transceiver to emit tones and received signals as normal or mutethe speaker during Emergency operation.39