BASIC OPERATIONSSWITCHING POWER ON/ OFFPortableTurn the Power switch/ Volume control clockwise to switch the transceiver powerON.● The following screen appears if the Custom Start-up Screen has not been set.Turn the Power switch/ Volume control counterclockwise to switch the transceiverpower OFF.MobilePress [ ] to switch the transceiver ON.● The following screen appears if the Custom Start-up Screen has not been set.Press [ ] again to switch the transceiver OFF.o Transceiver PasswordIf the transceiver is password protected, “Input Password” will appear on the displaywhen the power is turned on. To unlock the transceiver, enter the correct password.1 Press the button programmed as [Transceiver Password] to enter TransceiverPassword Mode.Alternatively, press the button programmed as [Menu] to enter Transceiver PasswordMode using the Menu Mode.● If a password has been registered and the [Transceiver Password] function has notbeen programmed to a button or configured to the menu, the transceiver entersTransceiver Password Mode when the power is turned on.2 Enter a number using the [J] and [K] buttons.● On full button model Portable transceivers or Mobile transceivers with microphone withkeypad, you can enter the password directly by pressing the keypad.3 Press the [ ] or [ ] button to accept the number.3