o Channel Down －>Press this button to decrease the channel number. {p. 4}o Channel Entry Press this button to enter Channel Entry Mode, to select a channel.o Channel Information Allows you to cycle through the display information as follows: Channel name > Zone-channel number > Frequency > QT/DQT > RANo Channel Recall Press this button during Scan to return to the last called zone and channel.o Channel Up Press this button to increase the channel number. {p. 4}o Clear Press this button to end a call or cancel a data transmission.o Clock Refer to “CLOCK” {p. 44} .o Clock Adjustment Allows you to set the clock. Refer to “CLOCK” {p. 44} .o CW Message Press this button to send the CW message.o Digit 10x Down <10x->Press this button to decrease the Selcall number by 10 with each press.o Digit 10x Up <10x+>Press this button to increase the Selcall number by 10 with each press.o Digit 1x Down <1x->Press this button to decrease the Selcall number by 1 with each press.o Digit 1x Up <1x+>Press this button to increase the Selcall number by 1 with each press.o Direct Channel 1 ~ 5 Press one of these buttons to jump to a frequently used zone and channel (pre-programmed by your dealer). If activated by your dealer, you can set your own DirectChannels by selecting your desired zone and channel using Direct Channel 1 ~ 5Select.o Direct Channel 1 ~ 5 SelectAllows you to set the currently selected zone and channel as the Direct Channel 1 ~5.24
