o Save Log Data Allows you to save this transceiver's operation and communication logs.o Scan Refer to “SCAN” {p. 33} .o Scan Delete/ Add Allows you to include or omit each channel in the scan sequence.o Scan Normal Allows you to forcibly perform a non-priority scan even when priority scan has beenset.o Scan Program Allows you to reprogram the Scan List and Priority channels using your transceiver.Refer to “SCAN PROGRAMMING” {p. 34} .o Scrambler/ Encryption Allows you to prevent a third party from listening in on your call. Refer to“SCRAMBLER (ANALOG/ LTR)/ ENCRYPTION (NXDN/ DMR)” {p. 40} .o Scrambler/ Encryption CodeAllows you to change the scrambler code used in the transmission. Refer to“SCRAMBLER (ANALOG/ LTR)/ ENCRYPTION (NXDN/ DMR)” {p. 40} .o Send the GPS Data For Portable transceivers, this allows you to send your positioning data to the basestation when a GPS unit has been installed.For Mobile transceivers, this allows you to send your positioning data to the basestation. However, the following must be noted.● When using the NX-3720G, NX-3720HG, NX-3820G, NX-3820HG, you must connect aKRA-40 GPS antenna.● When using the NX-3720, NX-3720H, NX-3820, NX-3820H, you must connect an externalGPS unit.● When the power is turned ON and/or the reception condition of the GPS satellite is poor,positioning may take longer to complete.● When using the built-in GPS Receiver, “GPS Ant Fail” appears on the display if the GPSantenna is not connected or the connection is abnormal (e.g. short circuit).o Short Message Allows you to send short messages such as an address, telephone number, etc.o Site Down －>Press this button to decrease the site number.o Site Lock Allows you to lock the current site. The transceiver will not be able to search foralternate sites, and “Site Lock” appears on the display.29
