Kenwood NX-3000 Series User Manual

Also see for NX-3000 series: User guide User guide User guide User manual User guide

o Selecting a Number from the List1 Press the button programmed as [Autodial] to enter Autodial Mode.Alternatively, press the button programmed as [Menu] to enter Autodial Mode using theMenu Mode.● The last called unit appears on the display.2 Press the [J] and [K] buttons to select your desired list number.3 Press the PTT switch to make the call.MAKING A TELEPHONE CALL (LTR TRUNKING)o Manual Dialing1 Select the desired zone and telephone group ID.2 Press the PTT switch to start the call.3 Enter the desired number using the DTMF keypad.o Autodial1 Select the desired zone and telephone group ID.2 Press the button programmed as [Autodial] to enter Autodial Mode.Alternatively, press the button programmed as [Menu] to enter Autodial Mode using theMenu Mode.● The last called unit appears on the display.3 Press the [J] and [K] buttons to select your desired list number.4 Press the PTT switch to make the call.RECEIVING A TELEPHONE CALL1 When a call is received, “Phone Call” will appear on the display.2 Press and hold the PTT switch to speak, and release it to receive.● Only one person can speak at a time.3 To end the call, press the button programmed as [Clear].MAKING A STATUS CALL1 Select your desired zone and channel.2 Press the button programmed as [Status] to enter Status mode.Alternatively, press the button programmed as [Menu] to enter Status mode using theMenu Mode.3 Press the [J] and [K] buttons to select the status ID you want to transmit.4 Press the PTT switch or the [ ] button to initiate the Status call.● After the status call has been successfully received by the called unit, “Complete”appears on the display.38