Kenwood NX-3000 Series User Manual

Also see for NX-3000 series: User guide User guide User guide User manual User guide

4 Repeat steps 2 and 3 to enter the entire password.● Press the [ ] or [#] button to delete an incorrectly entered number. Press and holdthe [ ] or [#] button to delete all numbers.5 Press the [ ] or [ ] button to confirm the entry.● If you enter an incorrect password, an error tone sounds and the transceiver remainslocked.● The password can contain a maximum of 6 digits.ADJUSTING THE VOLUMEPortableRotate the Power switch/ Volume control to adjust the volume.Rotate clockwise to increase the volume and counterclockwise to decrease thevolume.MobilePress the button programmed as [Volume Up] to increase the volume. Press thebutton programmed as [Volume Down] to decrease the volume.SELECTING A ZONE AND CHANNEL1 Select the desired zone using the buttons programmed as [Zone Up]/ [ZoneDown]. Each zone contains a group of channels.2 Select the desired channel using the buttons programmed as [Channel Up]/[Channel Down]. Each channel is programmed with settings for transmitting andreceiving.● The transceiver may have names programmed for zones and channels. The zonename and channel name can contain up to 12 and 14 characters respectively forPortable transceivers, and up to 14 characters each for Mobile transceivers.4