Kenwood TK-2180 Modification Information

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

2 CONNECT OPTIONAL DEVICES10 Modification Information Version: 1.13 USA2.2 KCT-40 Cable(TK-7180/ 8180 only)You can install the connection cable (KCT-40) for externaldevices to the TK-7180/ 8180 transceivers. This sectiondescribes how to connect the KCT-40 cable to the TK-7180/ 8180 transceivers.2.2.1 DescriptionThis product is the connection cable or external devicesprepared for the TK-7180/ 8180 transceivers.2.2.2 Features• The cable length is 40 cm (1.3 ft).• One end of the cable has the D-sub 25-pin connector(transceiver side) and the other end has the Molex 15-pin connector (KDS-100 or KGP-2A/ KGP-2B side).• The Molex 15-pin connector is equipped with the dust-proof cover.2.2.3 Mechanical Specifications! Product Dimensions and WeightTable 2-4 Product Dimensions and Weight! Cable SpecificationsFigure 2-2 Mechanical PartsTable 2-5 Mechanical Parts2.2.4 Electrical Specifications! Terminal SpecificationsTable 2-6 Terminal SpecificationsItem Connector Cable LengthLength 55 mm 40 cm/ 1.3 ftWidth 47.5 mmThickness 16.5 mmWeight 60 g1231171054BA869A B77400 –30Spiral ShieldCableSpiral ShieldInsulatorCable x 11A Side TerminalNo. 7B Side TerminalNo. 3Detail : Connection Process Cable SpecConductorUL1571AWG26 x 13Max φ 6.4No. Part Name Qty Remarks1 Housing 1 MOLEX: 39-03-31572 Terminal 14 MOLEX: 1855T (L)3 Cover 1 5211564 D-sub Connector 1 Used inch screw(No. 4 - 40UNC)5 D-sub Cover Set 1 CD4225H0*006 Cable 2 UL1007AWG26Color: Black Length: 30 mm7 Cable 1UL1007AWG2613-pin Shield cable Length:400 mm8 Heat Shrink Tube 2 Sumi Tube φ 2.0 x 14 mm9 Heat Shrink Tube 2 Sumi Tube φ 7.0 x 20 mm10 Tube 1 Rubber φ 9.0 Clearwhite11 Cable Tie 1 Color: BlackPin No.D-Sub25 Function Specification1 - -2 - -3 - -4 - -5 DIData Signal Input:60% system daviation with 2Vp-p Input/Impedance=10kohm, Non Pre-emphasis6 - -7 GND Ground8 AIO847kohm Pull-Up to 5VInput: L < 0.8V, H > 4.2VOutput: 0.2mAmax, L< 0.3V, H> 4.8Vemf9 TXD2Serial Data Output 2:TTL Level, L < 0.7V H > 4.2V with25kohm load, Zo > 1kohm10 RXD2 Serial Data Input 2:TTL Level(+5/0 Vmax), L< 0.8V H> 4.2V11 - -12 AIO7 Same as Pin No.813 AIO6 Same as Pin No.814 SB Switched Battery VoltageDC 13.6V +/-15% 2.0Amax15 - -16 - -