3 CONNECT THIRD PARTY OPTIONS49 Modification Information Version: 1.13 USA• Position other cable as shown below.9. Reinstall the shielding plate, top rubber packing, andthe top case of the TK-7180/ 8180 transceivers.3.6.3 Configuration using KPG-89DYou can configure the GPS receiver information to thetransceiver using KPG-89D after installing the receiver.Following procedures shows how to configure the GPSreceiver information.1. Run the KPG-89D.2. Select “Program” > “Read Data from the Transceiver”.You can also click the icon on the Toolbar.The Read Data from the Transceiver window appears.3. Click “Read”.The KPG-89D starts reading the configuration datafrom the TK-7180/ 8180 transceivers.4. Select “Edit” > “Optional Features”.The Optional Features window appears.5. Click the Common-Page 3 tab.Configure the COM port 1 or 2 to “GPS” and polarity.Refer to the “FPRG 7.6 6.7.3 Common-Page 3 Tab”for details.6. Select “Edit” > “FleetSync”.The FleetSync window appears.7. Click the GPS tab.Configure the GPS function same as 3.5 ExternalGPS Unit. Refer to the “FPRG 6.12.6 GPS Tab” fordetails.8. Select “Program” > “Write Data to the Transceiver”. Youcan also click the icon on the Toolbar.The Write Data to the Transceiver window appears.9. Click “Write”.The configuration data having the GPS informationwill be configured to the transceiver.