Kenwood TK-2180 Modification Information

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Version: 1.13 USA Modification Information 232 CONNECT OPTIONAL DEVICESTable 2-22 CN2/4 Pin SpecifucationFigure 2-10 Jumper Pin Specifications (Top View)Table 2-23 Jumper Pin Specifications (CN 5)Note: 1-pin and 2-pin (HR1) connection and 4-pin and 5-pinconnection are default setting." External SpeakerConnect KES-5 to Pin4 and Pin5 of the KAP-2 CN4(Molex 6 Pin) with the supplied accessary connector andpins.." Pablic Address (PA) FunctionThe PA outpu switch relay is controlled by turning the PAfunction on and off. When the PA is activated, the PAoutput flows through the following path.The audio signal input from the microphone passesthrough the filter, amplefier and other circuits, then goesto CN3-pin 5 (SPI) of KAP-2. The audio signal passesthrough the relay (K2) and out to CN2-pin2.When the Jumper is located pin4 and pin5 while PA key isoff, the receive audio come out from the internal soeaker.Otherwise, located pin5 and 6, the received audio isoutputed from External spealer (KES-5)." Horn Alert (HA) FunctionThe KAP-2 canbe controlled by turning the HA functionon and off and by using a signaling decode output. Therelay has a capability of current 2A maximum to work ahorn relay of vehicle.There are two Horn Alert settings. (HA1 and HA2)2.6.5 Standard Specifications" DisplayNo remarks.2.6.6 Supplied AccessoriesFigure 2-11 Supplied AccessoriesTable 2-24 Supplied AccessoriesName Description1 HR2 Horn Alert signal Output 2: 2Amax2 GND Ground3 OSP External speaker output (PA); 2Amax4 ESP External speaker output; 2A max5 GND Ground6 HR1 Horn Alert signal Output 1; 2AmaxPinLocation HA HR1 Relay PinLocation PA AF OUTPUT1-2 Pin OFF Open 4-5 Pin OFF Internal SPON Grounded ON Pablic Address2-3 Pin OFF Open 5-6 Pin OFF External SPON Short with HR2 ON Pablic AddressHR1HR2I N TEXTPin No.Unit2 pin connector1 2 3 4 5 6For main setconnector (E-40-6393-x5)Jumper connector(E40-6375-x5)No. Name Part Number Qty Remarks1Screw(Brazier HeadTaptite)N87-2606-x8 12 Square Plug E59-0419-x5 13 InsulatingCover F29-0481-x5 14 CrimpTerminal E23-1257-x5 8 ChainTerminal13 42