2 CONNECT OPTIONAL DEVICES18 Modification Information Version: 1.13 USA2.5.5 Electrical Specifications! Terminal SpecificationsTable 2-16 Terminal SpecificationsPCB interconnection connector: E40-6378-x5 (14-pinConnector)2.5.6 Standard SpecificationsTable 2-17 Standard Specifications" MIL STANDARDMeets the following specifications to comply with thespecifications. The KMC-35/ 36 must be used withthe specifications." IEC 529 (IP Code) IP-XXMeets the following specifications to comply with thespecifications. The KMC-35/ 36 must be used as anoptional microphone." DisplayNo remarks.2.5.7 Supplied AccessoriesTable 2-18 Supplied AccessoriesPanel SideDescriptionSide TransceiverPinNumberSignalNamePinNumberSignalName1 SPI Front PanelSpeaker Input 14 SPI2 GND Ground 13 GND3 8C 8 V Power Supply 12 8C4 SB Power Entry AfterPower-on 11 SB5 GND Ground 10 GND6 PSWPower SwitchControl SignalInput9 PSW7 MIC Mic Signal Output 8 MIC8 ME Mic Ground 7 ME9 PSENS Panel SeparateOutput 6 PSENS10 TXD Serial DataOutput 5 TXD11 RXD Serial DataOutput 4 RXD12 GND Ground 3 GND13 SHIFT Beat Shift Output 2 SHIFT14 RST2 Sub -com ResetInput 1 RST2MIL810-C MIL810-D MIL-810E MIL-810FLowPressure500.1/Procedure I500.2/ProcedureI, II500.3/ProcedureI, II500.4/ProcedureI, IIHighTemp.501.1/ProcedureI, II501.2/ProcedureI, II501.3/ProcedureI, II501.4/ProcedureI, IILowTemp.502.1/Procedure I502.2/ProcedureI, II502.3/ProcedureI, II502.4/ProcedureI, IITemp.Shock503.1/Procedure I503.2/Procedure I503.3/Procedure I503.4/ProcedureI, IISolarRadiation505.1/Procedure I505.2/Procedure I505.3/Procedure I505.4/Procedure IRain506.1/ProcedureI, II506.2/ProcedureI, II506.3/ProcedureI, II506.4/ProcedureI, IIIHumidity507.1/ProcedureI, II507.2/ProcedureII, III507.3/ProcedureII, III507.4Salt Fog 509.1/Procedure I509.2/Procedure I509.3/Procedure I 509.4Dust 510.1/Procedure I510.2/Procedure I510.3/Procedure I510.4/ProcedureI, IIIVibration514.2/ProcedureVIII, X514.3/Procedure I514.4/Procedure I514.5/Procedure IShock516.2/ProcedureI, II, III, V516.3/ProcedureI, IV, V516.4/ProcedureI, IV, V516.5/ProcedureI, IV, VElement Code Letters First Code Second CodeNumbers orLettersIP(InternationalProtection)5 (Dust-protection)4 (Splashing)5 (Jetting) *1*1 If IP-x5 is applicable to the head unit only, IP-x4 is applicable tothe transceiver body.If the head unit is mounted to the transceiver body, IP4X isapplicable to the transceiver.No. Name Part Number Qty. Remarks1 Screw Set N99-2040-x5 1 -2 Bracket J29-0698-x3 1 -3 Dressed Screw N08-0550-x4 2 -4 Interface Cable E30-7514-x5 1 Length: 700 cm5 Rubber Cap F07-1884-x3 2 -MIL810-C MIL810-D MIL-810E MIL-810F