Version: 1.13 USA Modification Information 272 CONNECT OPTIONAL DEVICES! Power ConsumptionTable 2-28 Power Consumption! Output Characteristic" Conditions• The signal source having the output impedance600ohm provides the sinewave of 30 mVrms 1kHz from the AI (12-pin) to the AGND (13-pin).• Power Voltage: 5 V ± 0.1 V• Terminate the AO terminal (11-pin) and AGND(10-pin) with a 10kohm resistor." Result• S/N when playing back the voice: Above 40 dB• Distortion when playing back the voice: Lessthan 8%2.7.5 Standard SpecificationsUnit is not provided. (Obtain through the body)2.7.6 Supplied AccessoriesTable 2-29 Supplied Accessories2.7.7 Configuration of VGS-11. Prepare the VGS-1 board.2. Attach the cushion (G13-1995-x4) on the shield caseof the VGS-1.3. Attach the cushion (G13-1992-x4) on the componentside of the VGS-1.2.7.8 Install VGS-1 to TK-2180/ 31801. Remove two screws on the cover.Min. Typ. Max. Unit ConditionSupply Voltage 4.5 5 5.5 VCurrent (14-pin)21mANormalOperation44 Flash ROMErase2.5 StandbyNo. Name Part Number Remarks Qty1 InstructionManual B62-1741-x0 7 languages 12 Cushion A G13-1974-x4 13 Cushion B G13-1992-x4 14 Cushion C G13-1993-x4 15 Cushion D G13-1994-x4 16 Cushion E G13-1995-x4 17 spacer J30-1292-x4 1