Version: 1.13 USA Modification Information 112 CONNECT OPTIONAL DEVICES2.2.5 Standard Specifications" Display SpecificationsNo remarks.2.2.6 Supplied AccessoriesNo Supplied Accessory.2.2.7 Connector LocationThe following table explains how to interface with otherperipherals.Figure 2-3 15Pin Molex ConnecterFigure 2-4 25Pin D-Sub ConnectorTable 2-7 KCT-40 Cable Connector Pin Assignment2.2.8 Connecting KCT-40 Cable1. Remove the cap for accessory on the rear panel of thetransceiver.2. Connect the KCT-40 cable to the D-sub 25-pinconnector on the rear side of the transceiver.17 - -18 - -19 DEODetected Signal Output740 mVp-p with standard modurationNon De-emphasis/ Non Squelched20 AIO5 Same as Pin No.821 AIO4 Same as Pin No.822 AIO3 Same as Pin No.823 AIO2 Same as Pin No.824 AIO1 Same as Pin No.825 - -D-sub 25-pinPin number Function Molex 15-pinPin numberKDS-100/KGP-2A/BFunction1 - - -2 - - -Pin No.D-Sub25 Function Specification3 - - -4 - - -5 DI 5 DO6 - - -7 GND 3 GND8 AIO8 9 TXS/ LOK9 TXD3 15 RXD10 RXD3 14 TXD11 - - -12 AIO7 11 MIM13 AIO6 6 PTT14 SB 1 SB15 - - -16 - - -17 - - -18 - - -19 DEO 4 DI20 AIO5 8 SQ21 AIO4 10 AM22 AIO3 13 DISP OFF(KPG-2A/ 2B)23 AIO2 12 -24 AIO1 7 DTC25 - - -D-sub 25-pinPin number Function Molex 15-pinPin numberKDS-100/KGP-2A/BFunction