Kenwood TK-2180 Modification Information

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Version: 1.13 USA Modification Information 132 CONNECT OPTIONAL DEVICES2.3.4 Appearance! Top PanelFigure 2-5 Top Panel! Side Panel and Front PanelFigure 2-6 Side Panel and Front Panel2.3.5 Electrical Specifications! ModulationTable 2-9 Modulation Type! General SpecificationsMeasured and inspected under the standardconditions unless it is noted.Table 2-10 General Specifications! Electrical SpecificationsTable 2-11 Electrical Specifications2.3.6 Optional AccessoriesTable 2-12 Optional AccessoriesNo. Item Description1 Modulation Minimum Shift Keying (MSK)2 Baud Rate 1200/ 2400 bpsNo. Item Description1 Power VoltageNominal Power Voltage: DC 13.6 VNegative GroundRange: DC 10.0 V - 15.7 V2 TemperatureRange -20°C to +60°C3 MeasurementEnvironmentKIS 58-01: The transceiver ismeasured and tested under theproduct inspection specifications.4 Low frequencyoutputKIS 58-01: The transceiver ismeasured and tested under theproduct inspection specifications.5 Alarm OutputImpedance 16 ohm6 Modem OutpuImpedance 600 ohm7 Modem InputImpedance 600 ohm46.5421MENU SEL32 4 588187No. Item MeasurementCondition Spec.1 Modem Encodedefualt LevelDO: 511randompattern/ 600ohm700+/-20mVrms2 Modem EncodeLevel RangeDO: 1200Hz/600ohm100 - 1000mVrms3 Modem DecodeLevel RangeDI: 1200Hz/600ohm100 - 1000mVrms4 Retaining period forthe received dataLithium Battery Fullycharged & GPSbackup 30 μAAbove 2months5ConsumptionCurrent for Storingthe received dataWithout GPS unit Below 50uA6 Bit Error Rate(1200 bps)DI: 700 mVrms12dB SINAD level Below 0.5%7 Bit Error Rate(2400 bps)DI: 700 mVrms12 dB SINAD level Below 0.5%8 ConsumptioncurrentINT/ EXT SP Max.When the INT/ EXTSP are at maximum.Below 700mA9 Real time clockaccuracyFrequency Stability(25°C)5+/-25ppm(1 min/Month)TemperatureCharacteristic-10 to +70°C25°C Reference+10/-120ppmNo. Model Name Name (Specifications)1 KPG-46 Programming Interface Cable(8-pin modular)2KPG-71D(For PC2 protocol;ver3.10 or later)Field Programming Software(FPU)3 KCT-34 Transceiver Interface Cable(for TK-780/880 mobile ) *1*1 Common option to the KGP-2A/ 2B (Modem GPS Receiver/Controller)4 KCT-35 Transceiver Interface Cable(for TK-x60 series mobile ) *15 KCT-39 Transceiver Interface Cable(for TK-7100/8100 mobile ) *16 KCT-40 Transceiver Interface Cable(for TK-7150/8150/7180/8180) *17 KCT-36 Extension Cable *1