12345678910111213141516171819202132NAMING MEMORY CHANNELSYou can name memory channels using up to 7alphanumeric characters. When you recall a namedmemory channel, its name appears on the display with thestored frequency. Names can be callsigns, repeaternames, cities, names of people, etc.Note:uYou cannot use this function after having selected 140:140 memorychannel ratio.uYou cannot name the Call, L1 to L3, nor U1 to U3 channels.1 Recall the desired memory channel.2 Press [MNU] to enter Menu mode.3 Select Menu No. 4 (Memory).4 Press[sssss], then select item No. 3 (Memory Name).5 Press[SET].• The first digit blinks.6 Turn the Tuning control, or press Mic [UP]/[DWN], toselect the first digit.• To skip by four characters when operating the abovecontrol or keys, press [MHz]. Press [MHz] again to quitthis jump function.7 Press[sssss].• The second digit blinks.8 Repeat steps 6 and 7 to enter up to 7 digits.• After entering the 7th digit, pressing[sssss] causes an errorbeep to sound.• To re-enter the preceding digit, press[ttttt].• To clear all digits and move back to the first digit, press[VFO].9 Press[SET] again to complete the setting.10 Press [MNU] to exit Menu mode.Note:uNames can be assigned only to memory channels in which you havestored frequencies and related data.uThe stored names can be overwritten by repeating steps 1 to 10.uThe stored names also are erased by clearing memory channels.PWRPWRVOL SQLCALLCALL2PWRPWRVOL SQLCALLCALL12PWRPWRVOL SQLCALLCALL1
