12345678910111213141516171819202184INSTALLING OPTIONSINSTALLING THE VS-3 VOICE SYNTHESIZER UNITCAUTION: ALWAYS SWITCH OFF THE POWER AND UNPLUG THEDC POWER CABLE FIRST.1 Remove the five screws from the upper cover of thetransceiver.2 Hold the VS-3 unit with the component side facinginward, and insert the VS-3 connector into thecorresponding transceiver connector.3 Replace the upper cover (5 screws).KENWOOD FM DUAL BANDER TM-V7KENWOOD FM DUAL BANDER TM-V7INSTALLING A DETACHABLE FRONT PANEL KIT(DFK-3C/ DFK-4C/ DFK-7C)CAUTION: ALWAYS SWITCH OFF THE POWER AND UNPLUG THEDC POWER CABLE FIRST.1 While sliding the spring-loaded release switch on therear of the front panel, remove the front panel from themain unit.• Be careful not to drop the front panel when releasing it.2 Hang the connector of the connectorized front panelcable onto the catch on the main unit, and secure theconnector using the supplied screw.• If the screw is loose, the transceiver may not functionproperly.Release switch KENWOOD FM DUAL BANDER TM-V7Component sideViewed with the frontpanel removed
