12345678910111213141516171819202172• The following types of front panel key functions can beassigned:• The following types of front panel key functions cannot beassigned:• The front panel key will still function normally after"copying" its function to a Programmable Function key.• To restore the default functions shown in the table above,do a Full Reset {page 35}.Note:uIf the LOCK switch located on the rear of the microphone is ON,you cannot re-program the Programmable Function keys.uPressing the PTT switch in step 2 assigns the VFO/MR Switchfunction.CONFIGURING PROGRAM FUNCTION KEYSThe Programmable Function keys are [PF], [MR], [VFO],and [CALL] located on the face of the microphone. If youprefer, you can change the default functions assigned tothese keys.To assign a front panel key function:1 Press one of the following key combinations dependingon which key you want to re-program:Mic [PF]+ POWER ON ("PF 1" appears)Mic [MR]+ POWER ON ("PF 2" appears)Mic [VFO]+ POWER ON ("PF 3" appears)Mic [CALL]+ POWER ON ("PF 4" appears)2 Press the key or key combination on the front panel thatyou want to assign.[PF][MR][VFO][CALL]Programmable Function Key Default FunctionTX Band SelectMemory RecallVFO SelectCall Channel Select[F] (1 s), [KEY][F] (1 s)Tuning control[KEY][KEY]+ POWER ON[F]+ Mic [KEY]VOL control[F], [KEY][F]PWR switchSQL control[KEY] (1 s)
