591234567891011121314151617181920214 Press a numeric key 0 to 9 on the Mic keypad to selectthe desired channel.5 Press[SET].• The display for entering a DTMF number appears.6 Use the keypad to enter the digits of the number to bestored.• The corresponding DTMF tones are heard.• If you enter an incorrect digit, press [VFO] to erase alldigits entered.7 Press[SET] to complete setting.• The entered DTMF number appears with the channelnumber.8 Press [MNU] to exit Menu mode.STORING DTMF NUMBERS FOR AUTOMATIC DIALERTo store a DTMF number with a maximum of 16 digits inany of 10 dedicated DTMF memory channels, follow theprocedure below.Note:uAudible DTMF tones from other transceivers near you may be pickedup by your MC-53DM or MC-45 microphone. If so, this could preventthe function from working correctly.uDTSS or Page does not function while you are storing a DTMFnumber even if a DTSS or Page code is received that matches onealready stored in memory.1 Press [MNU] to enter Menu mode.2 Select Menu No. 7 (DTMF Memory).3 Press[sssss].• The memory channel operated last appears.PWRPWRVOL SQLCALLCALLPWRPWRVOL SQLCALLCALLPWRPWRVOL SQLCALLCALL
