12345678910111213141516171819202146PROGRAM SCANProgram Scan is similar to VFO Scan except that youselect the frequency range of the scan.n Setting Scan LimitsYou can store up to three scan ranges on each band,using memory channels L1/U1, L2/U2, and L3/U3.1 Select the desired band.2 Turn the Tuning control, or press Mic [UP]/[DWN],to display the desired lower limit.3 Press[F].4 Turn the Tuning control, or press Mic [UP]/[DWN],to select channel L1, L2, or L3.5 Press [MR].• The lower limit is stored in the channel.6 Turn the Tuning control, or press Mic [UP]/[DWN],to display the desired upper limit.7 Press[F].8 Turn the Tuning control, or press Mic [UP]/[DWN],to select channel U1, U2, or U3.• If you have selected for example L1 in step 4,select U1.9 Press [MR].• The upper limit is stored in the channel.10 To confirm the stored scan limits, press [MR], thenselect the L and U channels.Note:uThe lower limit must be lower in frequency than the upper limit.uThe lower and upper frequency steps must be equal.uThe lower and upper limits must be selected on the same band.
