© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.330.2. Use Template and Selective EffectsThis topic deals with template and selective effects.Requirement:Import predefined effects.For more information see Import via user interface.Template EffectsTo apply a template effect:1. Create a template effect:Edit an object in the effect pool if no fixtures are selected. The column QTY is set to None in the effecteditor.For more information see Use predefined effects.2. Select fixtures in the fixture sheet.3. To take the effects into the programmer, tap a template effect in the effect pool.All effect layers are taken into the programmer.And the effect is instantly executed.Selective EffectsSelective effects are similar to presets. There is only a link in the object of the effect pool leading to theprogrammer.To apply a selective effect:1. Create a selective effect:Edit an object in the effect pool if fixtures are selected and tap Take Selection . The column QTY displaysthe number of the fixtures assigned.For more information see Use predefined effects.2. To select the fixtures, tap a selective effect.3. To take the effect into the programmer, tap the selective effect once again.The effect is executed.30.3. Create an effect in the programmerIt is possible to generate an effect in the programmer.Requirements:Patch fixtures or channels.For more information on patching see Adding fixtures to your show.Enable Auto in the fixture or channel sheet so that it obeys the encoder bar.1039
