© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.35. The position has been adjusted.32.3. Use Stage MarkersA stage marker is a virtual fixture.It is used to operate objects such as singers or fixtures in a 3D space via the console. Fixtures can direct their beamsto a stage marker.Requirement:Patch the fixtures Stage Marker or Stage Marker II in the Patch & Fixture Schedule.For more information on patching see Adding fixtures to your show.Hint:The fixture Stage Marker moves in the position mode XYZ and the Stage Marker II moves in the positionmode XYZ, rotates and can be scaled.Move the Stage Marker1. Select the stage marker for example in the fixture sheet.2. Open the stage view:-Tap Other and then tap Stage in the Create Basic Window.-The stage marker is displayed in form of a square at the bottom of the stage view.3. Tap Position .4. To move the stage marker, activate MP Trans and use the three encoders from left that are located belowscreen 2.5. To adjust the size of the stage marker, tap MP Trans to toggle it to MP Scale and use the encoders.6. To rotate the stage marker about the axes, tap MP Scale to toggle it to MP Rot and use the encoders.The position of the marker has been adjusted.1078
