© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.31. Example:If you clone fixture type 1 to fixture type 2 with the default option, i.e., Low Prio Merge:This process creates global data for fixture type 2.Fixture type 2 now does the exact same thing it did before cloning.Fixture type 2 keeps the data of fixture type 1 in case fixture type 2 should not have any data for specific objects.2. Example:If you clone fixture type 1 to fixture type 2 with the option Merge:This process creates global data for fixture type 2.Fixture type 2 now does the exact same thing as fixture 1.Fixture type 2 keeps its data in case fixture type 1 should not have any data for specific objects.3.Example:If you clone fixture type 1 to fixture type 2 with the option Overwrite:This process creates global data for fixture type 2.Fixture type 2 now does the exact same thing as fixture type 1.23.3. Clone PresetsTable of content:Clone fixture to fixtureClone fixture to fixture typeClone fixture type to fixtureClone fixture type to fixture typeClone to universal fixture typeImportant:As mentioned in Examples cloning from or to fixture types is only possible in presets.Where to Use CloneIt is possible:To clone from fixture to fixture933
