© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.3In this example we are going to grab only the color values from one fixture and apply it to another.1. Use the "Demo Dimmer and more" demo show or a show with some fixtures and some filters.2. Make sure the Selected filter is the "All" filter.3. Select fixture 1 and give it values on several attributes including Dimmer, Position, and use the MixColorattributes to blend a new color.4. Select a different fixture and give it another position and dimmer values.Now we would like to grab the color values only from the first fixture. We do not want to grab the position anddimmer values from the fixture, only the color.5. Press At Fixture 1 If . Now you can select the filter you want to use.6. We need all the color information so tap the Color button in the Preset Control Bar. The "EndIf" commandis automatically added when a single thing is tapped after pressing the If key7. Press the Please keys to execute the command.Now both fixtures have the same color values.27.9. What are masksMasks are a way to hide fixtures and attributes in some sheets and the Stage window.Mask can be local to the window, but they can also be in the mask pool. Sheets and Stage can then listen to theselected mask in the pool and apply it to the sheet or stage window.If you do not know about pools, then it is strongly suggested that you first read the Pools in General section.The Mask pool could look like this:Mask pool - pool styleAs with all pools, this can also be changed into Sheet style in the pool options. Then it could look like this:984
