© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.3Using the Command LineShow files can be deleted using the command line. The command is called DeleteShow. Read more about it here.10.6. Using a USB stickThere are different things to keep in mind when using a USB stick.Here is a list of good advice for the USB stick.Do not use a big stick. Do not go above 16Gb.Name the stick, but do not use a space in the name. Underscore or Dash are ok.It should be formatted in FAT32.If the stick have been in a Mac or PC make sure it has not been configured as something other than a"removable disk".This is not rules in all software versions. But it is a list of advice that have been gathered by limitations in differentsoftware version.So maybe not rules, but at least a good advice.10.7. Setting up a file serverThe session Master can be connected to a file server in the network.There are three different server systems that can be use. Each type is described below.Generally you need to tap the Setup Server button in the Backup Menu. Then select the type wanted in the dropdown menu called "Connection Type".If the console succeeds connecting to the server, then it will create a new tab with the label you provide in thesetup (read below).Restriction:grandMA2 onPC cannot be a session Master and connect to a server.Restriction:Consoles needs enough free memory to mount a file server. It will most likely not be able to successfullyconnect using a console with only 2GB RAM.Restriction:The server tab is only available for the master in the session.FTPIn the FTP setup you need to connect to a FTP server (using port 21).589
