© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.3The two top input fields in this pop-up can be used to set a range or simply have a range of one.Below this is the renumber section. Here is the option to set the "New Number". This will be the number of the firstcue if a range of cues are selected.A "Step Width" can be defined. This is relevant if a range of cues are selected. This will then be used to set the stepsize between the cue range.With the input fields correctly filled out, tapping the Renumber button will do the renumbering - this will also closethe pop-up.Other FunctionsThe Other Functions section at the bottom have four buttons."Change Color" is described below."Block Cue(s)", "Unblock Cue(s)" are related to tracking. This is described in the What is Tracking topic."Delete Cue(s)" will delete the selected cues. This is discussed in the Delete Cues topic.Change cue colorA cue can have a color assigned to the row in the Sequence Executor Sheet.This can be done using the command line or by tapping the Change Color button in the Edit Cue Numbers pop-up.The Appearance keyword is used to do this via the command line.Unless you use the command line input to specify a color then the Select Color pop-up appears.The sheet options control if this color is visible and how may cells will have the background color. Read more aboutthis in the Sheet Options - Display - Cue Color Columns.19.7. Delete CuesDeleting a cue will remove the values stored in the cue.The easy way to delete a cue is using the keys or keyboard.The syntax to delete a cue on the selected executor is: Delete Cue [cue number].If it is a different executor then you can tap a key associated to the executor after the above syntax or add theinformation in the syntax: Delete Cue [cue number] Executor [executor number].When this command is run then a pop-up will appear. It could look like this:831
