© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.35.13. Connect grandMA2 fader wingTo extend the console by 15 motorized faders and 15 executor buttons, connect a grandMA2 fader wing.Hint:You can connect up to four grandMA2 fader wings to one grandMA2 console.1. Connect one end of a 15 pin D-Sub cable to the MA-LINK connector on the rear panel.2. Connect the other end to the grandMA2 fader wing.The grandMA2 fader wing is connected to the console.grandMA2 full-size MA-LINK connectorTo configure the wings see wing & monitor setup.5.14. Setup your PCTo run grandMA2 onPC with the best result, we recommend to adjust the following settings on your PC.Turn on High Performance Power PlanTo turn on the high performance power plan:Click the Start button , and then click Control Panel. In the search box, type power options, and then clickPower Options. Under Select a power plan, click Show additional plans, and then click High performance.The high performance power plan is turned on.Optimize High Performance Power OptionsTurn off everything what can interrupt the grandMA2 onPC.To optimize the power options:51
