© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.3Sequence EditorThis pop-up has two parts: The top part and the bottom part.The top part is all the settings that can be changed regarding the sequence. They are all described in the What areCues and Sequences topic.The bottom part is all the columns and rows from the Sequence Executor Sheet. Everything with a gray backgroundcan be edited.19.3. Storing cuesStoring cues is actually quite simple.Simply press the Store key and then one of the executor buttons where you want to store.There are of course more details to storing, so please keep reading.Store a new cue on an empty ExecutorIf you store a cue on an empty executor then the grandMA2 software automatically stores the cue in a newsequence and assigns this sequence to the executor using the default settings.Going back to the example in the top of this topic: just pressing the Store key and then an executor button on theempty executor is enough. The software assumes that you are storing a cue.This will automatically be cue number 1 - nothing else was specified.816
