© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.3Important:Remember to save your view after editing the Set Buttons - otherwise the changes are lost next time aview is recalled.21.2. Working with MIBThis topic is about some of the details concerning MIB (Move In Black). The What is MIB topic might be a goodplace to start if MIB is new to you.MIB valuesThe MIB value is assigned in the MIB column in the Sequence Executor Sheet.An asterisk "*" in the MIB cell indicates that a cue is capable of MIB, but no MIB value is given. A MIB value in red,indicates that a MIB value is given, but the cue is not capable to MIB. "MIB capability" is defined as a cue with oneor more fixtures with dimmer-value above zero, and previous state of dimmer-value not above zero (= fixture is fadingup) - and one or more other additional attributes (= something to preposition).Editing the MIB cell, will open a pop-up like this:Select MIB pop-upThis provide three options at the top, and then a list of all the previous cues. This list of cues only displays the cuesthat are before the cue being edited.883
