© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | GermanyPhone +49 5251 688865-30 | tech.support (at)malighting.com | www.malighting.comVersion 3.3This was some different ways of editing the DMX address of a fixture without creating a show upload.13.8. DMX SheetThe DMX sheet is used to see the actual DMX output from the system. It shows the result from the executors,programmer, incoming merged DMX and any Masters that might limit the output.The sheet can be created as a view on any empty space on you screens. Minimum size is 3 squares wide and 2high.It could look like this:DMX Sheet windowThe main part of this window displays a big grid with every DMX address, represented by its own cell. This makes it avery long list (all 256 universes are there).The DMX channel value is displayed in this cell.The gray vertical bar on the left side displays the DMX address of the first column - there are two ways to see the DMXaddress: Absolute DMX address and the normal Universe divided. This can be changed in the Options (read below).The absolute address mode will display the DMX addresses as a continuous number. This means that the first addressin the second universe will not be written as "2:1" but as "513" (512 addresses from the first universe + 1 from thesecond).676
