5-24 Installing the Operating System with Express Setup4. Specify "Complete memory dump" and modify [Dump file:] in the [Write debugginginformation] group box.e.g. Write the debug information in D drive write the file name "MEMORY.DMP".D:\MEMORY.DMP5. Click [Settings] on the [Performance] group box.The [Performance Options] window appears.6. Click [Advanced] tab on the [Performance Options] window.7. Click [Change] on the [Virtual memory] group box.8. Modify [Initial Size] in the [Paging file size for selected drive] box to the value larger than[Recommended], and click [Set].IMPORTANT: The above-mentioned paging file size is recommended forcollecting debug information (memory dump). The paging filewith initial size large enough to store the dump file in the bootdrive is required.Correct debug information might not be able to be collected due tovirtual memory shortage when the paging file is insufficient, so setan enough size of the paging file with the entire system. For more information on "Recommended" value, see "CreatingPartition Size" described earlier. In case the memory is expanded, re-specify the paging file to suitthe new memory size.9. Click [OK].The message to restart the system may appear according to the modified specification. Insuch case, follow the message to restart the system.
