D-4 Installing Windows Server 2003 x64 EditionsINSTALLING WINDOWS SERVER 2003 X64 EDITIONSPreparations for Installation NEC EXPRESSBUILDER CD-ROM Microsoft Windows Server 2003 R2 Standard x64 Edition (CD-ROM) / MicrosoftWindows Server 2003 R2 Enterprise x64 Edition (CD-ROM) User's Guide Getting Started Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDERCreating "Windows Server 2003 x64 Edition OEM-DISK forNEC EXPRESSBUILDER"Before installing, create Windows Server 2003 x64 Edition OEM-DISK for NECEXPRESSBUILDER.NOTE: If you have already "Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER" for NEC Express5800 Serverwhich you are going to install Windows Server 2003 x64 Edition, youdo not need to create it again.You can create Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER withthe following two procedures. Create from the menu which appears when running NEC Express5800 Server with NECEXPRESSBUILDER.If you have only NEC Express5800 Server to create Windows Server 2003 x64 EditionOEM-DISK for NEC EXPRESSBUILDER, use this procedure.If Windows Server 2003 can be operated on NEC Express5800 Server, you can use theother procedure described later.Follow the steps below.1. Prepare one 3.5-inch floppy disk.2. Turn on your NEC Express5800 Server.3. Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive of the server.4. Press the RESET switch or press Ctrl + Alt + Delete to reboot the server .(You may alsoturn off and then on again to reboot the server.)The system will boot from the CD-ROM and NEC EXPRESSBUILDER starts.5. Select [Create Support Disk] from [Tools].6. Select [Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER]from [Create Support Disk] menu.