iiABOUT THIS USER'S GUIDEThis manual is a guide for proper setup and use of your server.This manual also covers useful procedures for dealing with difficulties and problems that may ariseduring setup or operation of your server.Keep this manual for future use.The following describes how to proceed with this manual.How to Use This ManualTo aid you in finding information quickly, this manual contains the following information:Chapter 1 Notes on Using Your Serverincludes information that needs attention to use the server. Make sure to read this chapter beforesetting up and using the server. It also includes requirements and advisory information fortransfer and disposal of the server.Chapter 2 General Descriptionincludes information necessary to use the server, such as names and functions of itscomponents, handling of the floppy disk and DVD-ROM drives.Chapter 3 Setting Up Your Servertells you how to select a site, unpack the system, make cable connections, and power on yoursystem.Chapter 4 Configuring Your Servertells you how to configure the system and provides instructions for running the BIOS SETUPUtility and the RAID configuration utility, which is used to configure RAID drives in your system.This chapter also provides information on mother board jumper settings.Chapter 5 Installing the Operating System with Express Setupdescribes how to install the operating system.Chapter 6 Installing and Using Utilitiesdescribes how to install the utilities for the server. It also includes a description on using theattached "NEC EXPRESSBUILDER" CD-ROM.Chapter 7 Maintenanceprovides you with all the information necessary to maintain successful operation of the server.This chapter also includes a description on relocating and storing the server.Chapter 8 Troubleshootingcontains helpful information for solving problems that might occur with your system.Chapter 9 Upgrading Your Serverprovides you with instructions for upgrading your system with an additional processor, optionalmemory, optional add-in cards, hard disk drives, peripheral devices, and power supply.Chapter 10 Internal Cabling Diagramincludes cabling information for the SAS/SATA2 controller, 5.25-inch device, and the powersupply.Appendix A Specificationprovides specifications for your server.