4-14 Configuring Your ServerMemory ConfigurationThe following screen appears if you select "Memory Configuration" on the Advanced menu.See the table below for the items.Option Parameter Description Your SettingSystemMemory– Indicates the total capacity of the basememory. (View only)ExtendedMemory– Indicates the total capacity of the memoryavailable for OS. (View only)DIMM Group#1 StatusDIMM Group#2 StatusDIMM Group#3 StatusNormalDisabledNot installedIndicates the current memory status. (Viewonly)"Normal" indicates that the memory devicesoperate normally."Disabled" indicates that one or more memorydevices are defected."Not Installed" indicates that no memorydevices are installed.On-screen group numbers and DIMMslockets on mother board are associated asfollows.Group #1: DIMM #A-1, #B-1Group #2: DIMM #A-2, #B-2Group #3: DIMM #A-3, #B-3Each group is composed of two DIMMs ofinterleave type.MemoryRetest[No]YesIf you select [Yes], BIOS will clear historicalmemory status and retest all the DIMMs onthe next boot. This parameter is automaticallyreset to "No" at the next boot.ExtendedRAM Step1MB1KBEvery location[Disabled]Specify whether to execute a memory test forextended memory or not. If the test isexecuted, specify the block size.Sparing [Disabled]EnabledSpecify whether to enable or disable onlinespare memory feature.[ ]: Factory-set