Configuring Your Server 4-33Menu TreeSetting list+: Selection/execution parameter : Setting parameter. •: Information display>: Can be set (modified) after creation of logical driveMenu Description+Configure Performs Configuration settings+Easy Configuration Set configuration (Using fixed value)+New Configuration Set new configuration+View/Add Configuration Additional setting / viewing configuration+Clear Configuration Clear configuration+Select Boot Drive Chose Bootable Logical Drive+Initialize Initialize logical drive+Objects Various settings+Adapter Set disk array controller+Sel. Adapter Clear configurationRebuild Rate 30Chk Const Rate 30FGI Rate 30BGI Rate 30Disk WC Display default value (setting not required)Read Ahead OnBios State EnableStop on Error NoFast Init EnableAuto Rebuild OnAuto Resume EnableDisk Coercion 1GBFactory Default Default setting+Logical Drive Logical drive operation+Logical Drives Select logical drive (when multiple logical drives exist)+Initialize Initialize logical drive+Check Consistency Check logical drive redundancy+View/Update Parameters Display logical drive information• RAID Display RAID level• SIZE Display logical drive capacity• Stripe SIZE Display stripe size• #Stripes Display the number of hard disk drives in logical drive• State Display logical drive status• Spans Display setting of span• Disk WC Display setting of write cache• Read Ahead Display setting of read ahead+Physical Drive Physical drive operation+Physical Drive Selection Menu Select physical drive+Make HotSpare Set as hot-spare disk for auto rebuilding+Force Online Make a disk online+Force Offline Make a disk offline+Drive Properties Display hard disk drive information• Device Type Hard disk drive type• Capacity Hard disk drive capacity• Product ID Hard disk drive model• Revision No. Hard disk drive revision+Rebuild Perform rebuilding+Check Consistency Perform logical drive redundancy check
