Installing the Operating System with Express Setup 5-214. Specify "Complete memory dump" and modify [Dump file:] in the [Write debugginginformation] group box.e.g. Write the debug information in D drive write the file name "MEMORY.DMP".D:\MEMORY.DMP5. Click [Settings] on the [Performance] group box.The [Performance Options] window appears.6. Click [Advanced] tab on the [Performance Options] window.7. Click [Change] on the [Virtual memory] group box.8. Modify [Initial Size] in the [Paging file size for selected drive] box to the value larger than[Recommended], and click [Set].IMPORTANT: Be sure to create memory dump with the size described above onthe OS partition. If [Default Size] of the paging file is specified tothe value smaller than "Recommended" value, the correct debuginformation (memory dump) may not be collected. For more information on "Recommended" value, see "PartitionSize to be Created" described earlier. To prepare for the situation when any trouble occurred, werecommend you to press dump switch to confirm that the dumpwill be collected normally in advance. In case the memory is expanded, re-specify the paging file to suitthe new memory size.9. Click [OK].The message to restart the system may appear according to the modified specification. Insuch case, follow the message to restart the system.
