Troubleshooting 8-21The following error log is included in the event log while operating the system:Event ID: 16Source: iANSMiniportType: ErrorCategory: NoneDescription: Team #0:The last adapter has lost link.Network connection has been lost.→ Though the above error is included in the event log when specifying the teaming, theLAN driver can work properly.[Complete] does not appear on [Role of Computer] screen.→ The [Complete] does not appear if the Setup File that has already been created isloaded.→ [Complete] appears only when you first entered the [Role of Computer] screen.Once you go to the next screen from [Role of Computer], the [Complete] will notappear even if you enter [Back] to go back to the [Role of Computer] screen.Select [Use Existing Array] at [New/Existing RAID Configuration], but the OS is installed in thewhole area of the disk.→ Is there any other partition than the partition to re-use (excluding maintenance area)?If the partition other than the one to re-use does not exist, the setup will reserve thewhole area of the disk to install Windows 2000.Specified to join the Domain, but the system is installed as Workgroup.→ When the setup fails to join the Domain during the installation, it will install thesystem as Workgroup. Open [System] in Control Panel to specify joining theDomain.Specified large value as partition size, but when Windows 2000 is actually started, the systempartition is created by 4095MB.→ Is the [Partition Size] specified by the value larger than the real area? If you want tocreate one partition in all area of the hard disk(excluding the maintenance area) toinstall the OS, specify [All Area].→ Are you specifying over 200GB for the partition size?Be sure to specify less than 200GB for the partition size.
