6-8 Installing and Using Utilities– Install Maintenance Partition UtilitiesVarious utilities are installed in the maintenance partition from the CD-ROM.– Update Maintenance Partition UtilitiesVarious utilities are copied in the Maintenance Partition from the update disk. Thismenu is only used when the update disk is supplied from your service representative orattached with your system.– FDISKExecute FDISK command of ROM-DOS system. You can create/delete partitions, etc. BIOS/FW/etc. UpdateThis menu allows you to update the software module such as BIOS and firmware of theserver by using the update disk (3.5-inch floppy disk) that is distributed from NECcustomer service representative.After rebooting the system, an update program is started automatically from the floppydisk, and the various BIOS and firmware programs are updated.IMPORTANT: Do not turn off the server while the update programis running. If the update processing is discontinued, the systembecomes unable to start. Initialize Remote Management Card"Initialize Remote Management Card" is used to configure the Remote Management Cardwith correct parameters of the system installed it. System ManagementThe parameters of BMC (Baseboard Management Controller) are set for remote controland alert. HelpDisplays explanations about various functions of NEC EXPRESSBUILDER. Return to the Top MenuChoosing this menu returns to the Top Menu.
