Appendix D D-98. Insert the Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER into thefloppy disk drive, and press Enter.A list of mass storage devices is displayed.Select the [Adaptec Ultra320 SCSI Cards (Win XP/Server 2003 IA-32)] and press Enter.Then, it returns to the screen of Procedure 7.9. If the optional board is installed, select the proper SCSI Adapter and press Enter.– Adaptec Ultra160 SCSI Cards (Win Server 2003) (When N8103-56 board is installed.)– Adaptec Ultra320 SCSI Cards (WinXP/Server 2003 IA-32) (When N8103-75 board isinstalled.)– MegaRAID SCSI 320-1 RAID Controller Driver (When N8103-80F board is installed.)– MegaRAID SCSI 320-2 RAID Controller Driver (When N8103-81F board is installed.)Continue performing tasks according to the subsequent messages that appear.10. Update the system.11. Install the driver and make detailed settings. SCSI controller (N8103-56)If your system has a controller (N8103-56), following message often appears on thedisplay during the upgrade installation to Windows Server 2003.Please type D:/i386 and click OK. (D: CD-Drive)Insert diskThe file 'adpu160m.sys' on Adaptec Windows 2000 Family Manager set V1.12 S2 isneeded.Type the path where the file is located, and then click OK. If PROSet is already installed, uninstall the PROSet before upgrading.If the teaming function is enabled, disable the function before uninstalling PROSet. During upgrade installation, [Disk Insert] dialog box may appear.If it appears, click Cancel. When upgrade installation is completed, [Device Driver Wizard] dialog box may appear.If it appears, click Cancel, then update the system.
