4-8 Configuring Your ServerPCI Hot PlugTo install the PCI board with the PCI hot plugSelect [Advanced] - [PCI Configuration] - [Hot Plug PCI Control] -[Minimum/Middle/Maximum*]* The setting varies depending on the PCI board subject to the hot plug. See the tablebelow.N code Board name Setting ValueN8104-85F 100BASE-TX Adapter MinimumN8104-103F 1000BASE-T Adapter MinimumSelect [Advanced] - [PCI Configuration] - [Hot Plug PCI Control] - [Empty Bus DefaultSpeed] - [PCI Slots 5-6*]/[PCI Slots 7-8*] and set the frequency of the boards to beinstalled.* If the hot plugs are provided for PCI Slot 5-6 or PCI Slot 7-8, previously set the speedsof the slots to meet those of the boards to be installed.Saving the Configuration DataTo save the BIOS configuration dataSelect [Exit] - [Exit Saving Changes] or [Save Changes].To discard changes to the BIOS configuration dataSelect [Exit] - [Exit Discarding Changes] or [Discard Changes].To resume the default BIOS configuration data (may differ from factory-set value)Select [Exit] - [Load Setup Defaults].To save the current value as user defaultSelect [Exit] - [Save Custom Defaults].To load the user-defined defaultSelect [Exit] - [Load Custom Defaults].
