Configuring Your Server 4-39 SCSI Device ConfigurationMove the cursor onto "SCSI Device Configuration" and press Enter to display thefollowing submenu.SCSI Device ConfigurationSCSI Device ID #0 #1 #2 #3 #4 #5 #6 #7Sync Transfer Rate (MB/Sec) ------------ 320 320 320 320 320 320 320 320Packetized ------------------------------------- Yes Yes Yes Yes Yes Yes Yes YesQAS ---------------------------------------------- No No No No No No No NoInitiate Wide Negotiation ------------------ Yes Yes Yes Yes Yes Yes Yes YesEnable Disconnection --------------------- Yes Yes Yes Yes Yes Yes Yes YesSend Start Unit Command --------------- Yes Yes Yes Yes Yes Yes Yes YesBIOS Multiple LUN Support -------------- No No No No No No No NoInclude in BIOS Scan ---------------------- Yes Yes Yes Yes Yes Yes Yes YesSCSI Device ID #8 #9 #10 #11 #12 #13 #14 #15Sync Transfer Rate (MB/Sec) ------------ 320 320 320 320 320 320 320 320Packetized ------------------------------------- Yes Yes Yes Yes Yes Yes Yes YesQAS ---------------------------------------------- No No No No No No No NoInitiate Wide Negotiation ------------------ Yes Yes Yes Yes Yes Yes Yes YesEnable Disconnection --------------------- Yes Yes Yes Yes Yes Yes Yes YesSend Start Unit Command --------------- Yes Yes Yes Yes Yes Yes Yes YesBIOS Multiple LUN Support -------------- No No No No No No No NoInclude in BIOS Scan ---------------------- Yes Yes Yes Yes Yes Yes Yes YesThe following table lists submenu items, available parameters, and descriptions.IMPORTANT: Select a parameter for each submenu item on a per-SCSI ID basis. Verify the SCSI ID of a desired device beforeconfiguration.NOTE: To find out the SCSI ID for the optional device connected,select "SCSI Disk Utilities" on the Options menu and press Enter.See "SCSI Disk Utilities" for detail.
