Setting Up Your Server 3-2512ABDevice with the serialinterface(e.g., Management PC)Device with the USB Interface(e.g., keyboard)KeyboardMouseDisplay unitHub(multiport repeater)*1 To connect the external SCSI devices, change the baseboard cable connection.*2 A leased line cannot be connected directly to this connector. The console of a management PC can be connected toonly serial port B. (BIOS setting required) Connect the console to only serial port B on either the front or rear panel.To connect the rear side serial port B, change the baseboard cable connection with rear side serial cable that comeswith the server.Device with USB interface(e.g., terminal adapter)FRONTREARDevice with theserial interface *2Printer with theparallel interfaceDevice with the ICMB interfaceFinally connect the providedpower cord to the receptacle.If connecting the server to UPS,see the explanation below.When an optional powersupply unit is additionallyinstalledSCSI device *1Network systemon LAN(connectedvia a hub)Device with the serial interface(e.g., modem)Direct connection to the privatetelephone line is prohibited.100BASE TX/10BASE-T1000BASE-T100BASE TX/10BASE-T
