General Description 2-33Floppy Disk DriveYour server is provided with the 3.5-inch floppy disk drive on its front to write/read data to/from afloppy disk.Your server supports the following 3.5-inch floppy disks: 2HD floppy disk (double-sided high-density track type)Stores data of 1.44MB. 2DD floppy disk (double-sided double-density track type)Store data of 720KB.Make sure that the server is powered (the POWER/SLEEP lamp is lit) before inserting a floppy diskinto the floppy disk drive.When you completely insert the floppy disk into the floppy disk drive, the drive clicks and the ejectbutton on the floppy disk is slightly pushed out.NOTES: You cannot use a 1.2MB-formatted floppy disk. When an unformatted floppy disk is inserted, the message notifyingthat date read is not available and the message prompting formattingare displayed. Refer to the manual that comes with the OS toformat the floppy disk. If the floppy disk contains a system, powering on or restarting theserver with the floppy disk inserted boots the system from thefloppy disk.To eject the floppy disk from the floppy disk drive, press the eject button.NOTE: Make sure that the floppy disk access lamp is unlit beforeejecting the floppy disk. Ejecting the disk when the access lamp is litmay destroy the disk data.
