6-14 Installing and Using UtilitiesCONFIGURATION DISKETTE CREATOR"Configuration Diskette Creator" is a tool to create [Configuration Diskette] that is used forconfiguring the server with the Express Setup (see Chapter 5 for details).If you use the Configuration Diskette created by the Express Setup and Configuration DisketteCreator to operate the setup, you can setup from the installation of OS to several utilitiesautomatically except for a few key input to confirm the specification. Also, you can install thesystem with the same specification as before when re-installing the system. We recommend you tocreate [Configuration Diskette] to setup the servers from NEC EXPRESSBUILDER.NOTE: You can install Windows 2000/Windows Server 2003 without[Configuration Diskette]. Also, you can modify/newly create[Configuration Diskette] during the setup with NECEXPRESSBUILDER.Installing Configuration Diskette CreatorThis section describes about installing Configuration Diskette Creator on the computer that isrunning with Windows XP/2000, Windows Server 2003, Windows NT 3.51, and Windows95/98/Me to create Configuration Diskette.NOTE: Configuration Diskette Creator works on PC-AT compatiblecomputers.Windows XP/2000 / Windows Server 2003 / Windows NT 4.0 / Windows 95/98/MeFollow the procedure below to install Configuration Diskette Creator on the computer that isrunning with Windows XP/2000, Windows Server 2003, Windows NT 4.0, Windows 95/98/Me.NOTE: The instructions displayed on the screen may differ accordingto the model you are using, but setup can be operated with the sameprocedure.1. Start the OS.2. Insert the attached NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.Master Control Menu will appear.
