1-6 Notes on Using Your ServerPower Supply and Power Cord UseWARNINGDo not hold the power plug with a wet hand.Do not disconnect/connect the plug while your hands are wet. Failure to followthis warning may cause an electric shock.CAUTIONPlug in to a proper power source.Use a proper wall outlet. Use of an improper power source may cause a fire ora power leak.Do not install the server where you need an extension cord. Use of a cord thatdoes not meet the power specifications of your server may heat up the cord andcause a fire.Do not connect the power cord to an outlet that has an illegal number ofconnections.The electric current exceeding the rated flow overheats the outlet, which maycause a fire.Insert the power plug into the outlet as far as it goes.Heat generation resulting from a halfway inserted power plug (imperfect contact)may cause a fire. Heat will also be generated if condensation is formed on dustyblades of the halfway inserted plug, increasing the possibility of fire.Use the authorized power cord only.Use only the power cord that comes with your server. Use of an unauthorizedpower cord may cause a fire when the electric current exceeds the rated flow.Also, observe the following to prevent an electric shock or fire caused by adamaged cord.■ Do not stretch the cord harness.■ Do not pinch the power cord.■ Do not bend the power cord.■ Keep chemicals away from the power cord.■ Do not twist the power cord.■ Do not place any object on the power cord.■ Do not bundle power cords.■ Do not alter, modify, or repair the power cord.■ Do not secure the power cord with staples or equivalents.■ Do not use any damaged power cord. (Replace a damaged power cord witha new one of the same specifications. Ask your service representative forreplacement.)Do not use the attached power cord for any other devices or usage.The power cord that comes with your server is designed aiming to connect withthis server and to use with the server, and its safety has been tested. Do not usethe attached power cord for any other purpose. Doing so may cause a fire or anelectric shock.
