Installing Windows Server 2003 D-3INSTALLING Windows Server 2003Preparations for Installation NEC EXPRESSBUILDER CD-ROM Microsoft Windows Server 2003 Standard Edition (CD-ROM) or Microsoft WindowsServer 2003 Enterprise Edition (CD-ROM) User's Guide Getting Started Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDERCreating "Windows Server 2003 OEM-DISK for NECEXPRESSBUILDER"Before installing, create Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER.NOTE: If you have already "Windows Server 2003 OEM-DISK forNEC EXPRESSBUILDER" for NEC Express5800 Server which youare going to install Windows Server 2003, you do not need to create itagain.You can create Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER with thefollowing two procedures. Create from the menu which appears when running NEC Express5800 Server with NECEXPRESSBUILDER.If you have only NEC Express5800 Server to create Windows Server 2003 OEM-DISKfor NEC EXPRESSBUILDER, use this procedure.If Windows Server 2003 or Windows NT 4.0 can be operated on NEC Express5800 Server,you can use the other procedure described later.Follow the steps below.1. Prepare one 3.5-inch floppy disk.2. Turn on your NEC Express5800 Server.3. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.4. Press the RESET switch or press Ctrl, Alt and Delete to reboot the server .(You may alsoturn off and then on again to reboot the server.)The system will boot from the CD-ROM and NEC EXPRESSBUILDER starts.5. Select [Create Support Disk] from [Tools].6. Select [Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER] from [CreateSupport Disk] menu.
